JP E-Brake Using illustration
- Voltage input : 2S-6S Can tap directly on aircraft batteries Or use an external battery 2S-6S
- Voltage output: 6-10V
- Signal input : Connect the module on your receiver on a 2 or 3 position switch channel or for variable braking force, to a slider or rotary (variable) knob on your TX. Some will set up brakes as a mix, with the "down elevator" to save a channel.
- The braking force is controlled independantly Left / Right by the servo travel/endpoints you set in your TX.
|
Specifications
- Input：7.4v~25.2v (2~6S lipo)
- Output Voltage: 6~10V
- Size: 70 x 34 x 17mm
- Weight: 61.2g
|
